Проверка первой версии, мильтиплатформенная

.gitattributes

@@ -0,0 +1,63 @@
+###############################################################################
+# Set default behavior to automatically normalize line endings.
+###############################################################################
+* text=auto
+
+###############################################################################
+# Set default behavior for command prompt diff.
+#
+# This is need for earlier builds of msysgit that does not have it on by
+# default for csharp files.
+# Note: This is only used by command line
+###############################################################################
+#*.cs     diff=csharp
+
+###############################################################################
+# Set the merge driver for project and solution files
+#
+# Merging from the command prompt will add diff markers to the files if there
+# are conflicts (Merging from VS is not affected by the settings below, in VS
+# the diff markers are never inserted). Diff markers may cause the following 
+# file extensions to fail to load in VS. An alternative would be to treat
+# these files as binary and thus will always conflict and require user
+# intervention with every merge. To do so, just uncomment the entries below
+###############################################################################
+#*.sln       merge=binary
+#*.csproj    merge=binary
+#*.vbproj    merge=binary
+#*.vcxproj   merge=binary
+#*.vcproj    merge=binary
+#*.dbproj    merge=binary
+#*.fsproj    merge=binary
+#*.lsproj    merge=binary
+#*.wixproj   merge=binary
+#*.modelproj merge=binary
+#*.sqlproj   merge=binary
+#*.wwaproj   merge=binary
+
+###############################################################################
+# behavior for image files
+#
+# image files are treated as binary by default.
+###############################################################################
+#*.jpg   binary
+#*.png   binary
+#*.gif   binary
+
+###############################################################################
+# diff behavior for common document formats
+# 
+# Convert binary document formats to text before diffing them. This feature
+# is only available from the command line. Turn it on by uncommenting the 
+# entries below.
+###############################################################################
+#*.doc   diff=astextplain
+#*.DOC   diff=astextplain
+#*.docx  diff=astextplain
+#*.DOCX  diff=astextplain
+#*.dot   diff=astextplain
+#*.DOT   diff=astextplain
+#*.pdf   diff=astextplain
+#*.PDF   diff=astextplain
+#*.rtf   diff=astextplain
+#*.RTF   diff=astextplain

.gitignore

@@ -1,60 +1,363 @@
-# ---> C++
+## Ignore Visual Studio temporary files, build results, and
-# Prerequisites
+## files generated by popular Visual Studio add-ons.
-*.d
+##
+## Get latest from https://github.com/github/gitignore/blob/master/VisualStudio.gitignore
 
-# Compiled Object files
+# User-specific files
-*.slo
+*.rsuser
-*.lo
+*.suo
-*.o
+*.user
+*.userosscache
+*.sln.docstates
+
+# User-specific files (MonoDevelop/Xamarin Studio)
+*.userprefs
+
+# Mono auto generated files
+mono_crash.*
+
+# Build results
+[Dd]ebug/
+[Dd]ebugPublic/
+[Rr]elease/
+[Rr]eleases/
+x64/
+x86/
+[Ww][Ii][Nn]32/
+[Aa][Rr][Mm]/
+[Aa][Rr][Mm]64/
+bld/
+[Bb]in/
+[Oo]bj/
+[Oo]ut/
+[Ll]og/
+[Ll]ogs/
+
+# Visual Studio 2015/2017 cache/options directory
+.vs/
+# Uncomment if you have tasks that create the project's static files in wwwroot
+#wwwroot/
+
+# Visual Studio 2017 auto generated files
+Generated\ Files/
+
+# MSTest test Results
+[Tt]est[Rr]esult*/
+[Bb]uild[Ll]og.*
+
+# NUnit
+*.VisualState.xml
+TestResult.xml
+nunit-*.xml
+
+# Build Results of an ATL Project
+[Dd]ebugPS/
+[Rr]eleasePS/
+dlldata.c
+
+# Benchmark Results
+BenchmarkDotNet.Artifacts/
+
+# .NET Core
+project.lock.json
+project.fragment.lock.json
+artifacts/
+
+# ASP.NET Scaffolding
+ScaffoldingReadMe.txt
+
+# StyleCop
+StyleCopReport.xml
+
+# Files built by Visual Studio
+*_i.c
+*_p.c
+*_h.h
+*.ilk
+*.meta
 *.obj
-
+*.iobj
-# Precompiled Headers
-*.gch
 *.pch
-
+*.pdb
-# Compiled Dynamic libraries
+*.ipdb
-*.so
+*.pgc
-*.dylib
+*.pgd
-*.dll
+*.rsp
-
+*.sbr
-# Fortran module files
+*.tlb
-*.mod
+*.tli
-*.smod
+*.tlh
-
+*.tmp
-# Compiled Static libraries
+*.tmp_proj
-*.lai
+*_wpftmp.csproj
-*.la
-*.a
-*.lib
-
-# Executables
-*.exe
-*.out
-*.app
-
-# ---> Java
-# Compiled class file
-*.class
-
-# Log file
 *.log
+*.vspscc
+*.vssscc
+.builds
+*.pidb
+*.svclog
+*.scc
 
-# BlueJ files
+# Chutzpah Test files
-*.ctxt
+_Chutzpah*
 
-# Mobile Tools for Java (J2ME)
+# Visual C++ cache files
-.mtj.tmp/
+ipch/
+*.aps
+*.ncb
+*.opendb
+*.opensdf
+*.sdf
+*.cachefile
+*.VC.db
+*.VC.VC.opendb
 
-# Package Files #
+# Visual Studio profiler
-*.jar
+*.psess
-*.war
+*.vsp
-*.nar
+*.vspx
-*.ear
+*.sap
-*.zip
-*.tar.gz
-*.rar
 
-# virtual machine crash logs, see http://www.java.com/en/download/help/error_hotspot.xml
+# Visual Studio Trace Files
-hs_err_pid*
+*.e2e
-replay_pid*
 
+# TFS 2012 Local Workspace
+$tf/
+
+# Guidance Automation Toolkit
+*.gpState
+
+# ReSharper is a .NET coding add-in
+_ReSharper*/
+*.[Rr]e[Ss]harper
+*.DotSettings.user
+
+# TeamCity is a build add-in
+_TeamCity*
+
+# DotCover is a Code Coverage Tool
+*.dotCover
+
+# AxoCover is a Code Coverage Tool
+.axoCover/*
+!.axoCover/settings.json
+
+# Coverlet is a free, cross platform Code Coverage Tool
+coverage*.json
+coverage*.xml
+coverage*.info
+
+# Visual Studio code coverage results
+*.coverage
+*.coveragexml
+
+# NCrunch
+_NCrunch_*
+.*crunch*.local.xml
+nCrunchTemp_*
+
+# MightyMoose
+*.mm.*
+AutoTest.Net/
+
+# Web workbench (sass)
+.sass-cache/
+
+# Installshield output folder
+[Ee]xpress/
+
+# DocProject is a documentation generator add-in
+DocProject/buildhelp/
+DocProject/Help/*.HxT
+DocProject/Help/*.HxC
+DocProject/Help/*.hhc
+DocProject/Help/*.hhk
+DocProject/Help/*.hhp
+DocProject/Help/Html2
+DocProject/Help/html
+
+# Click-Once directory
+publish/
+
+# Publish Web Output
+*.[Pp]ublish.xml
+*.azurePubxml
+# Note: Comment the next line if you want to checkin your web deploy settings,
+# but database connection strings (with potential passwords) will be unencrypted
+*.pubxml
+*.publishproj
+
+# Microsoft Azure Web App publish settings. Comment the next line if you want to
+# checkin your Azure Web App publish settings, but sensitive information contained
+# in these scripts will be unencrypted
+PublishScripts/
+
+# NuGet Packages
+*.nupkg
+# NuGet Symbol Packages
+*.snupkg
+# The packages folder can be ignored because of Package Restore
+**/[Pp]ackages/*
+# except build/, which is used as an MSBuild target.
+!**/[Pp]ackages/build/
+# Uncomment if necessary however generally it will be regenerated when needed
+#!**/[Pp]ackages/repositories.config
+# NuGet v3's project.json files produces more ignorable files
+*.nuget.props
+*.nuget.targets
+
+# Microsoft Azure Build Output
+csx/
+*.build.csdef
+
+# Microsoft Azure Emulator
+ecf/
+rcf/
+
+# Windows Store app package directories and files
+AppPackages/
+BundleArtifacts/
+Package.StoreAssociation.xml
+_pkginfo.txt
+*.appx
+*.appxbundle
+*.appxupload
+
+# Visual Studio cache files
+# files ending in .cache can be ignored
+*.[Cc]ache
+# but keep track of directories ending in .cache
+!?*.[Cc]ache/
+
+# Others
+ClientBin/
+~$*
+*~
+*.dbmdl
+*.dbproj.schemaview
+*.jfm
+*.pfx
+*.publishsettings
+orleans.codegen.cs
+
+# Including strong name files can present a security risk
+# (https://github.com/github/gitignore/pull/2483#issue-259490424)
+#*.snk
+
+# Since there are multiple workflows, uncomment next line to ignore bower_components
+# (https://github.com/github/gitignore/pull/1529#issuecomment-104372622)
+#bower_components/
+
+# RIA/Silverlight projects
+Generated_Code/
+
+# Backup & report files from converting an old project file
+# to a newer Visual Studio version. Backup files are not needed,
+# because we have git ;-)
+_UpgradeReport_Files/
+Backup*/
+UpgradeLog*.XML
+UpgradeLog*.htm
+ServiceFabricBackup/
+*.rptproj.bak
+
+# SQL Server files
+*.mdf
+*.ldf
+*.ndf
+
+# Business Intelligence projects
+*.rdl.data
+*.bim.layout
+*.bim_*.settings
+*.rptproj.rsuser
+*- [Bb]ackup.rdl
+*- [Bb]ackup ([0-9]).rdl
+*- [Bb]ackup ([0-9][0-9]).rdl
+
+# Microsoft Fakes
+FakesAssemblies/
+
+# GhostDoc plugin setting file
+*.GhostDoc.xml
+
+# Node.js Tools for Visual Studio
+.ntvs_analysis.dat
+node_modules/
+
+# Visual Studio 6 build log
+*.plg
+
+# Visual Studio 6 workspace options file
+*.opt
+
+# Visual Studio 6 auto-generated workspace file (contains which files were open etc.)
+*.vbw
+
+# Visual Studio LightSwitch build output
+**/*.HTMLClient/GeneratedArtifacts
+**/*.DesktopClient/GeneratedArtifacts
+**/*.DesktopClient/ModelManifest.xml
+**/*.Server/GeneratedArtifacts
+**/*.Server/ModelManifest.xml
+_Pvt_Extensions
+
+# Paket dependency manager
+.paket/paket.exe
+paket-files/
+
+# FAKE - F# Make
+.fake/
+
+# CodeRush personal settings
+.cr/personal
+
+# Python Tools for Visual Studio (PTVS)
+__pycache__/
+*.pyc
+
+# Cake - Uncomment if you are using it
+# tools/**
+# !tools/packages.config
+
+# Tabs Studio
+*.tss
+
+# Telerik's JustMock configuration file
+*.jmconfig
+
+# BizTalk build output
+*.btp.cs
+*.btm.cs
+*.odx.cs
+*.xsd.cs
+
+# OpenCover UI analysis results
+OpenCover/
+
+# Azure Stream Analytics local run output
+ASALocalRun/
+
+# MSBuild Binary and Structured Log
+*.binlog
+
+# NVidia Nsight GPU debugger configuration file
+*.nvuser
+
+# MFractors (Xamarin productivity tool) working folder
+.mfractor/
+
+# Local History for Visual Studio
+.localhistory/
+
+# BeatPulse healthcheck temp database
+healthchecksdb
+
+# Backup folder for Package Reference Convert tool in Visual Studio 2017
+MigrationBackup/
+
+# Ionide (cross platform F# VS Code tools) working folder
+.ionide/
+
+# Fody - auto-generated XML schema
+FodyWeavers.xsd

CMakeLists.txt

@@ -0,0 +1,21 @@
+# CMakeList.txt: проект CMake для minecraft-launcher; включите исходный код и определения,
+# укажите здесь логику для конкретного проекта.
+#
+cmake_minimum_required (VERSION 3.8)
+
+# Включение горячей перезагрузки для компиляторов MSVC, если поддерживается.
+if (POLICY CMP0141)
+  cmake_policy(SET CMP0141 NEW)
+  set(CMAKE_MSVC_DEBUG_INFORMATION_FORMAT "$<IF:$<AND:$<C_COMPILER_ID:MSVC>,$<CXX_COMPILER_ID:MSVC>>,$<$<CONFIG:Debug,RelWithDebInfo>:EditAndContinue>,$<$<CONFIG:Debug,RelWithDebInfo>:ProgramDatabase>>")
+endif()
+
+project ("minecraft-launcher")
+
+# Добавьте источник в исполняемый файл этого проекта.
+add_executable (minecraft-launcher "minecraft-launcher.cpp" "minecraft-launcher.h")
+
+if (CMAKE_VERSION VERSION_GREATER 3.12)
+  set_property(TARGET minecraft-launcher PROPERTY CXX_STANDARD 20)
+endif()
+
+# TODO: Добавьте тесты и целевые объекты, если это необходимо.

CMakePresets.json

@@ -0,0 +1,101 @@
+{
+    "version": 3,
+    "configurePresets": [
+        {
+            "name": "windows-base",
+            "hidden": true,
+            "generator": "Ninja",
+            "binaryDir": "${sourceDir}/out/build/${presetName}",
+            "installDir": "${sourceDir}/out/install/${presetName}",
+            "cacheVariables": {
+                "CMAKE_C_COMPILER": "cl.exe",
+                "CMAKE_CXX_COMPILER": "cl.exe"
+            },
+            "condition": {
+                "type": "equals",
+                "lhs": "${hostSystemName}",
+                "rhs": "Windows"
+            }
+        },
+        {
+            "name": "x64-debug",
+            "displayName": "x64 Debug",
+            "inherits": "windows-base",
+            "architecture": {
+                "value": "x64",
+                "strategy": "external"
+            },
+            "cacheVariables": {
+                "CMAKE_BUILD_TYPE": "Debug"
+            }
+        },
+        {
+            "name": "x64-release",
+            "displayName": "x64 Release",
+            "inherits": "x64-debug",
+            "cacheVariables": {
+                "CMAKE_BUILD_TYPE": "Release"
+            }
+        },
+        {
+            "name": "x86-debug",
+            "displayName": "x86 Debug",
+            "inherits": "windows-base",
+            "architecture": {
+                "value": "x86",
+                "strategy": "external"
+            },
+            "cacheVariables": {
+                "CMAKE_BUILD_TYPE": "Debug"
+            }
+        },
+        {
+            "name": "x86-release",
+            "displayName": "x86 Release",
+            "inherits": "x86-debug",
+            "cacheVariables": {
+                "CMAKE_BUILD_TYPE": "Release"
+            }
+        },
+        {
+            "name": "linux-debug",
+            "displayName": "Linux Debug",
+            "generator": "Ninja",
+            "binaryDir": "${sourceDir}/out/build/${presetName}",
+            "installDir": "${sourceDir}/out/install/${presetName}",
+            "cacheVariables": {
+                "CMAKE_BUILD_TYPE": "Debug"
+            },
+            "condition": {
+                "type": "equals",
+                "lhs": "${hostSystemName}",
+                "rhs": "Linux"
+            },
+            "vendor": {
+                "microsoft.com/VisualStudioRemoteSettings/CMake/1.0": {
+                    "sourceDir": "$env{HOME}/.vs/$ms{projectDirName}"
+                }
+            }
+        },
+        {
+            "name": "macos-debug",
+            "displayName": "macOS Debug",
+            "generator": "Ninja",
+            "binaryDir": "${sourceDir}/out/build/${presetName}",
+            "installDir": "${sourceDir}/out/install/${presetName}",
+            "cacheVariables": {
+                "CMAKE_BUILD_TYPE": "Debug"
+            },
+            "condition": {
+                "type": "equals",
+                "lhs": "${hostSystemName}",
+                "rhs": "Darwin"
+            },
+            "vendor": {
+                "microsoft.com/VisualStudioRemoteSettings/CMake/1.0": {
+                    "sourceDir": "$env{HOME}/.vs/$ms{projectDirName}"
+                }
+            }
+        }
+    ]
+}

LICENSE.txt

@@ -0,0 +1,21 @@
+MIT License
+
+Copyright (c) [year] [fullname]
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.

README.md

@@ -1,4 +0,0 @@
-# minecraft-launcher
-
-Первая итерация самописного лаунчера для запуска сборок Minecraft
-

minecraft-launcher.cpp

@@ -0,0 +1,271 @@
+#include <iostream>
+#include <string>
+#include <vector>
+#include <cstdlib> // Для system()
+#include <filesystem> // C++17 для работы с файловой системой
+#include <fstream> // Для работы с файлами конфигурации
+
+// Пространство имен для удобства работы с файловой системой
+namespace fs = std::filesystem;
+
+// Имя файла конфигурации для хранения URL репозитория
+const std::string CONFIG_FILE = "launcher_config.txt";
+
+// --- Функции для работы с конфигурацией ---
+
+// Функция для сохранения URL Git-репозитория в файл
+void saveGitRepository(const std::string& repoUrl) {
+    std::ofstream configFile(CONFIG_FILE);
+    if (configFile.is_open()) {
+        configFile << repoUrl;
+        configFile.close();
+    } else {
+        std::cerr << "Ошибка: Не удалось открыть файл конфигурации для записи." << std::endl;
+    }
+}
+
+// Функция для загрузки URL Git-репозитория из файла
+std::string loadGitRepository() {
+    std::ifstream configFile(CONFIG_FILE);
+    std::string repoUrl;
+    if (configFile.is_open()) {
+        std::getline(configFile, repoUrl);
+        configFile.close();
+    }
+    return repoUrl;
+}
+
+
+// --- Кроссплатформенные функции ---
+
+// Функция для получения пути к папке .minecraft в зависимости от ОС
+fs::path getMinecraftPath() {
+    fs::path minecraftPath;
+
+#if defined(_WIN32)
+    // Для Windows путь обычно находится в %APPDATA%\.minecraft
+    char* appdata = nullptr;
+    size_t len;
+    _dupenv_s(&appdata, &len, "APPDATA");
+    if (appdata != nullptr) {
+        minecraftPath = fs::path(appdata) / ".minecraft";
+        free(appdata);
+    }
+#elif defined(__linux__)
+    // Для Linux путь обычно находится в ~/.minecraft
+    char* home = getenv("HOME");
+    if (home != nullptr) {
+        minecraftPath = fs::path(home) / ".minecraft";
+    }
+#elif defined(__APPLE__)
+    // Для macOS путь находится в ~/Library/Application Support/minecraft
+    char* home = getenv("HOME");
+    if (home != nullptr) {
+        minecraftPath = fs::path(home) / "Library" / "Application Support" / "minecraft";
+    }
+#else
+    std::cerr << "Неизвестная операционная система!" << std::endl;
+#endif
+
+    return minecraftPath;
+}
+
+// Функция для открытия папки в файловом менеджере по умолчанию
+void openFolder(const fs::path& folderPath) {
+    if (!fs::exists(folderPath)) {
+        std::cout << "Папка не существует. Создание папки: " << folderPath.string() << std::endl;
+        try {
+            fs::create_directories(folderPath);
+        } catch (const fs::filesystem_error& e) {
+            std::cerr << "Ошибка при создании папки: " << e.what() << std::endl;
+            return;
+        }
+    }
+
+    std::string command;
+#if defined(_WIN32)
+    command = "explorer \"" + folderPath.string() + "\"";
+#elif defined(__linux__)
+    command = "xdg-open \"" + folderPath.string() + "\"";
+#elif defined(__APPLE__)
+    command = "open \"" + folderPath.string() + "\"";
+#else
+    std::cerr << "Команда для открытия папки на данной ОС не поддерживается." << std::endl;
+    return;
+#endif
+
+    // Выполнение системной команды
+    system(command.c_str());
+}
+
+// Функция для очистки содержимого папки
+void clearFolder(const fs::path& folderPath) {
+    if (!fs::exists(folderPath) || !fs::is_directory(folderPath)) {
+        return; // Если папки нет, ничего не делаем
+    }
+    for (const auto& entry : fs::directory_iterator(folderPath)) {
+        try {
+            fs::remove_all(entry.path());
+        } catch (const fs::filesystem_error& e) {
+            std::cerr << "Не удалось удалить " << entry.path() << ": " << e.what() << std::endl;
+        }
+    }
+}
+
+
+// --- Функции меню ---
+
+// Функция для открытия папки с модами
+void openModsFolderAction() {
+    fs::path minecraftPath = getMinecraftPath();
+    if (minecraftPath.empty()) {
+        std::cerr << "Не удалось определить путь к папке Minecraft." << std::endl;
+        return;
+    }
+    fs::path modsPath = minecraftPath / "mods";
+    std::cout << "Путь к папке модов: " << modsPath.string() << std::endl;
+    openFolder(modsPath);
+}
+
+// Функция для установки URL репозитория
+void setGitRepositoryAction() {
+    std::string repoUrl;
+    std::cout << "\nВведите URL Git-репозитория (например, https://github.com/user/repo.git):" << std::endl;
+    std::getline(std::cin >> std::ws, repoUrl); // std::ws для очистки буфера от пробельных символов
+
+    if (repoUrl.empty()) {
+        std::cout << "URL не может быть пустым." << std::endl;
+        return;
+    }
+
+    saveGitRepository(repoUrl);
+    std::cout << "URL репозитория успешно сохранен." << std::endl;
+}
+
+// Функция для загрузки модов из Git
+void downloadModsAction() {
+    std::string repoUrl = loadGitRepository();
+    if (repoUrl.empty()) {
+        std::cout << "URL Git-репозитория не настроен. Пожалуйста, сначала установите его (пункт 2)." << std::endl;
+        return;
+    }
+
+    fs::path modsPath = getMinecraftPath() / "mods";
+    std::cout << "Папка для модов: " << modsPath.string() << std::endl;
+
+    // Убедимся, что папка существует
+    if (!fs::exists(modsPath)) {
+        try {
+            fs::create_directories(modsPath);
+        } catch (const fs::filesystem_error& e) {
+            std::cerr << "Ошибка при создании папки mods: " << e.what() << std::endl;
+            return;
+        }
+    }
+
+    // Запрос подтверждения перед очисткой
+    char confirmation;
+    std::cout << "\nВНИМАНИЕ! Все существующие файлы в папке 'mods' будут удалены." << std::endl;
+    std::cout << "Продолжить? (y/n): ";
+    std::cin >> confirmation;
+    
+    // Проверка, что пользователь ввел 'y' или 'Y'
+    if (confirmation != 'y' && confirmation != 'Y') {
+        std::cout << "Загрузка отменена." << std::endl;
+        // Очистка буфера ввода после чтения символа
+        std::cin.ignore(std::numeric_limits<std::streamsize>::max(), '\n');
+        return;
+    }
+     // Очистка буфера ввода
+    std::cin.ignore(std::numeric_limits<std::streamsize>::max(), '\n');
+
+
+    std::cout << "Очистка папки mods..." << std::endl;
+    clearFolder(modsPath);
+    std::cout << "Папка очищена." << std::endl;
+
+    // Формирование команды для клонирования репозитория
+    // Клонируем содержимое репозитория прямо в папку mods
+    std::string command = "git clone " + repoUrl + " \"" + modsPath.string() + "\"";
+    
+    std::cout << "\nВыполнение команды: " << command << std::endl;
+    std::cout << "Начинается загрузка модов. Это может занять некоторое время..." << std::endl;
+    
+    int result = system(command.c_str());
+
+    if (result == 0) {
+        std::cout << "Моды успешно загружены!" << std::endl;
+    } else {
+        std::cerr << "Произошла ошибка при загрузке модов. Убедитесь, что Git установлен и URL репозитория верный." << std::endl;
+    }
+}
+
+// Отображение главного меню
+void printMenu() {
+    std::cout << "\n--- Minecraft Mod Launcher ---" << std::endl;
+    std::cout << "1. Открыть папку с модами (.minecraft/mods)" << std::endl;
+    std::cout << "2. Указать/изменить URL Git-репозитория с модами" << std::endl;
+    std::cout << "3. Загрузить/обновить моды из Git-репозитория" << std::endl;
+    std::cout << "4. Выход" << std::endl;
+    std::cout << "-----------------------------" << std::endl;
+    
+    std::string currentRepo = loadGitRepository();
+    if (currentRepo.empty()) {
+        std::cout << "Текущий репозиторий: не задан" << std::endl;
+    } else {
+        std::cout << "Текущий репозиторий: " << currentRepo << std::endl;
+    }
+    
+    std::cout << "\nВведите ваш выбор: ";
+}
+
+
+// --- Главная функция программы ---
+
+int main() {
+    // Установка кодировки консоли для корректного отображения кириллицы в Windows
+#if defined(_WIN32)
+    system("chcp 65001 > nul");
+#endif
+
+    int choice;
+    while (true) {
+        printMenu();
+        std::cin >> choice;
+        
+        // Проверка на корректность ввода
+        if (std::cin.fail()) {
+            std::cout << "Ошибка: введите число." << std::endl;
+            std::cin.clear(); // Сброс флага ошибки
+            // Очистка буфера ввода до следующей новой строки
+            std::cin.ignore(std::numeric_limits<std::streamsize>::max(), '\n');
+            continue;
+        }
+
+        switch (choice) {
+            case 1:
+                openModsFolderAction();
+                break;
+            case 2:
+                setGitRepositoryAction();
+                break;
+            case 3:
+                downloadModsAction();
+                break;
+            case 4:
+                std::cout << "Выход из программы." << std::endl;
+                return 0;
+            default:
+                std::cout << "Неверный выбор. Пожалуйста, попробуйте снова." << std::endl;
+                break;
+        }
+        std::cout << "\nНажмите Enter для продолжения...";
+        // Очистка буфера перед ожиданием Enter
+        if (choice != 3 && choice !=2) {
+            std::cin.ignore(std::numeric_limits<std::streamsize>::max(), '\n');
+        }
+        std::cin.get();
+    }
+
+    return 0;
+}